How to Measure

How to measure for Roller Blinds.

We advise using a metal tape measure for accuracy. Measurements should be as accurate as possible. Please double check your measurements before you order your new blinds.

Inside Recessed Measuring

1. For the inside recess measurement make sure that the recess is at least 60mm deep or the blind will protrude  beyond the recess.

2. Measure the inside of the recess of the window frame from one side to the other and write down the measurement as shown below.

3. Measure the inside of the recess of the window frame from top to bottom and write down the measurement as shown below.                        

Outside Face Measurement

1. Measure from the outside edge of the architrave on one side to the other side as pictured and write down the measurement as shown below.                              

2. Measure from the top of the architrave to the bottom of the architrave or to to where you want the blind to finish and write down the measurement as shown below.

       Note there is a gap of approximately 15mm from the edge of the fabric to the ends of the roller mechanism.